HD High Definition Car Care HD Nitro Seal

HD High Definition Car Care HD Nitro Seal


Kit Contains:

– 1 HD Nitro Seal Part A
– 1 HD Nitro Seal Part B
– 1 Red Applicator
– 1 Black Applicator
– 1 Microfiber Towel
– 1 Latex Glove
– 1 Instruction Sheet
– 1 Nitro Seal Box (UPS orders only).

*Orders shipped with USPS Flat Rate Small Box will not include the Nitro Seal Box


HD NITRO SEAL is a co-polymer paint sealant. Make sure that the car is properly prepared by cleaning it and removing any scratches on the surface underneath. Wipe it down with rubbing alcohol then clean up any wax or existing contaminants that may be on the paint. HD NITRO SEAL extremely simple product to apply. We labelled it with black to go with the black pad is part “A” Red to go to Red pad is part “B”

using very little, typically one these cans will do two cars entirely.  Apply three small quick dabs and apply in even directions by hand or with a polisher.

Wait about 10 to 15 minutes for the product to flash on the surface; it’s going to turn haze over, let it completely flash.

Do the entire vehicle then come back. start again with part B again. Put 3 small drops onto the red pad from the red bottle and rub on the surface. With the “B” product, you can apply it in kind of a massaging or buffing motion.  The most important part about this is application is complete coverage.

What the part B does, is it brings out the shine and the depth, that part “A” can’t do. Don’t be afraid to apply it to the plastics or the trim or for the grill or lights or even on glass it’s not going to cause any issues. If anything it will coat and protect those parts longer.

However HD NITRO SEAL is intended for paint use to cover the entire body to protect seal the entire surface. All we have to do from this point on his wait one hour we want to wait for this to cure we are now going to remove it with the microfiber towel that is found in the package.


Wipe it down, back and forth. What you will notice when it rains is superior paint protection.  You will get “sheeting” not necessarily “water beading”

The water isn’t going to sit on the surface.  It’s going to start to fall off the first time it rains outside. You’ll be driving, make a turn, and the water will just slide right off the surface.

Don’t get the surface wet for 24 hours right after you apply HD NITRO SEAL because the two elements are still bonding with one another and providing the best protection.

So the longer that you allow the surface to remain dry without getting wet the better your paint protection will be and a longer-lasting paint sealant will be created. No need for endless manuals, polishers, or equipment.